AirLive WN-300ARM-VPN - Manual (Page 60)

AirLive WN-300ARM-VPN User’s Manual 58
-1- Data - Status Screen
ADSL
Modem Status This indicates the status of the ADSL modem component.
DownStream
Connection Speed
Displays the speed for the DownStream Connection.
UpStream
Connection Speed
If connected, displays the speed for the Up Stream (upload) ADSL
Connection.
ADSLDetails
Click this button to open a sub-window and view the details of each VC
(Virtual Circuit).
Internet (VC1)
Connection
Method
Displays the current connection method, as set in the Setup Wizard.
Connection Status This indicates the current status of the Internet Connection
 Active - Connection exists
 Idle - No current connection, but no error has been detected. This
condition normally arises when an idle connection is automatically
terminated.
 Failed - The connection was terminated abnormally. This could be
caused by Modem failure, or the loss of the connection to the ISP's
server.
If there is an error, you can click the "Connection Details" button to find
out more information.
Internet IP Address This IP Address is allocated by the ISP (Internet Service Provider). If
using a dynamic IP address, and no connection currently exists, this
information is unavailable.
WAN MAC Address It displays the MAC address for the WAN.
Connection Details
Click this button to open a sub-window and view a detailed description of
the current connection. Depending on the type of connection, a "log"
may also be available.
MultiPVC Details
Click this button to view the details of multi PVC in the sub-screen.
LAN
IP Address The IP Address of the WN-300ARM-VPN.
Network Mask The Network Mask (Subnet Mask) for the IP Address above.
DHCP Server This shows the status of the DHCP Server function. The value will be
"On" or "Off".
MAC Address This shows the MAC Address for the WN-300ARM-VPN, as seen on the
LAN interface.