AirLive WN-300ARM-VPN - Manual (Page 46)

Figure: TCP/IP Properties (Windows Vista)
5. Ensure your TCP/IP settings are correct.
Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows
setting. To work correctly, you need a DHCP server on your LAN.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured for a fixed (specified) IP address, no changes are required.
(The Administrator should configure the Wireless Access Point with a fixed IP address from the same address
range used on the PCs.)
Internet Access
To configure your PCs to use the WN-300ARM-VPN for Internet access:
 Ensure that the DSL modem, Cable modem, or other permanent connection is functional.
 Use the following procedure to configure your Browser to access the Internet via the LAN, rather than
by a Dial-up connection.
-1- For Windows 2000
1. Select Start Menu - Settings - Control Panel - Internet Options.
2. Select the Connection tab, and click the Setup button.
AirLive WN-300ARM-VPN User’s Manual 44