AirLive WN-300ARM-VPN - Manual (Page 27)

AirLive WN-300ARM-VPN User’s Manual 25
-1- Data - Wireless Screen
Region
Region Select the correct domain for your location. It is your responsibility to
ensure:
 That the WN-300ARM-VPN is only used in domains for which is
licensed.
 That you select the correct domain, so that only the legal channels for
that domain can be selected.
Multi SSID
SSID With Multiple SSIDs, you can have 2 SSIDs on one AP. For example, a
Guest SSID without encryption for visitors to have Internet access only, and
a Admin SSID with encryption for private use to secure your company
resources.
Select the desired SSID from the list to configure.
SSID 1/2 This is also called the "Network Name".
 If using an ESS (Extended Service Set, with multiple access points)
this ID is called an ESSID (Extended Service Set Identifier).
 To communicate, all Wireless stations should use the same
SSID/ESSID.
Broadcast SSID If enabled, the WN-300ARM-VPN will broadcast its SSID. This allows PCs
and other wireless stations to detect this Access Point and use the correct
SSID.
If disabled, PC users will have to manually enter the SSID and other details
of the wireless interface before they can connect to this Access Point.
Isolation within
SSID
If Enabled, devices that have the same SSID will not be able to see each
other.
Security Setting The current Wireless security is displayed. The default value is Disabled.
Configure SSID
1/2 Button
Click this button to access the Wireless security sub-screen, and view or
change the settings. See the following section for details.