AirLive WN-300ARM-VPN - Manual (Page 45)

Using DHCP
To use DHCP, select the radio button Obtain an IP Address automatically. This is the default Windows
setting. Using this is recommended. By default, the WN-300ARM-VPN will act as a DHCP Server.
Restart your PC to ensure it obtains an IP Address from the WN-300ARM-VPN.
Using a fixed IP Address ("Use the following IP Address")
If your PC is already configured, check with your network administrator before making the following changes.
 In
the Default gateway field, enter the WN-300ARM-VPN's IP address and click OK. Your LAN
administrator can advise you of the IP Address they assigned to the WN-300ARM-VPN.
 If
the DNS Server fields are empty, select Use the following DNS server addresses, and enter the DNS
address or addresses provided by your ISP, then click OK.
Checking TCP/IP Settings - Windows Vista
1. Select Control Panel - Network Connections.
2. Right click the Local Area Connection Status and choose Properties. Click Continue to the User
Account Control dialog box, then you should see a screen like the following:
Figure: Network Configuration (Windows Vista)
3. Select the TCP/IP protocol for your network card.
4. Click on the Properties button. You should then see a screen like the following.
AirLive WN-300ARM-VPN User’s Manual 43