AirLive WN-300ARM-VPN - Manual (Page 38)

3.7 Binding Screen
The Binding feature is for MultiPVC. If you have enabled multiple PVCs and set the WAN connection methods
individually, you can bind the LAN Ports and WLAN Port to them using this page. While binding one port to the
selected PVC, this port would connect Internet via this PVC. The PVC port should be configured first or the
bound port will not access the Internet.
While in Modem mode, Bridge connection can only be set for all the PVCs. You can click MultiPVC Details in
the Status screen to see all the information.
Note: When you switch to Modem mode from Router (Modem+Router), all the connection methods would be
changed to Bridge. You may need to reconfigure the Bridge IP/Netmask through wizard pages if you want to
access the WEB Server via the relevant port.
Figure: Binding Screen
-1- Data - Binding Screen
Port 0 This port is always bound to the Primary Internet Connection VC1.
Port 1~3 These ports can be bound to VC2~VC8. If it is not enabled, it would be bound to
VC1 as default.
WLAN The WLAN Port can be bound to VC2~VC8. If it is not enabled,, it would be
bound to VC1 as default.
VPI/VCI It displays the current VPI/VCI information of the selected PVC.
Type It displays the current connection type of the selected PVC.
Group It shows the group for one port when you have selected a PVC for this port.
AirLive WN-300ARM-VPN User’s Manual 36