AirLive WN-300ARM-VPN - Manual (Page 76)

AirLive WN-300ARM-VPN User’s Manual 74
Outgoing
Ports
 Type - Select the protocol (TCP or UDP) used when you send data to the
remote system or service.
 Start - Enter the beginning of the range of port numbers used by the
application server, for data you send to it. If the application uses a single
port number, enter it in both the "Start" and "Finish" fields.
 Finish - Enter the end of the range of port numbers used by the application
server, for data you send to it. If the application uses a single port number,
enter it in both the "Start" and "Finish" fields.
Incoming
Ports
 Type - Select the protocol (TCP or UDP) used when you receive data from
the special application or service. (Note: Some applications use different
protocols for outgoing and incoming data).
 Start - Enter the beginning of the range of port numbers used by the
application server, for data you receive. If the application uses a single port
number, enter it in both the "Start" and "Finish" fields.
 Finish - Enter the end of the range of port numbers used by the application
server, for data you receive.