AirLive WN-300ARM-VPN - Manual (Page 52)

Select the SSID for the WN-300ARM-VPN, and click Configure, to see a screen like the following:
Figure: Wireless Network Properties - WEP
Configure this screen as follows:
 Set
Network Authentication to match the WN-300ARM-VPN. (If the setting on the
WN-300ARM-VPN is "Auto", then either Open or Shared can be used.)
 For
Data Encryption, select WEP.
 For the Network key and Confirm network key, enter the default key value used on the
WN-300ARM-VPN. (Windows will determine if 64bit or 128bit encryption is used.)
 The
Key index must match the default key index on the WN-300ARM-VPN. The default value is 1.
 Ensure the options The key is provided for me automatically and This is a
computer-to-computer (ad hoc) network are unchecked.
 Click OK to save and close this dialog.
 This wireless network will now be listed in Preferred Networks on the screen below.
AirLive WN-300ARM-VPN User’s Manual 50