AirLive WN-300ARM-VPN - Manual (Page 15)

AirLive WN-300ARM-VPN User’s Manual 13
. Connect LAN Cables
bles to connect PCs to the Switching Hub ports on the WN-300ARM-VPN. Both
3. C
SL cable from to the ADSL port on the WN-300ARM-VPN (the RJ11 connector)
4. P
supplied power adapter to the WN-300ARM-VPN. Use only the power adapter provided.
5. C
D should be ON.
e of the LAN LEDs should be ON (provided the PC is also ON).
SL line is connected.
n, it should come ON.
dress of router’s LAN port is:
: 0
 For We
e client PC as DHCP client to obtain IP address from
computer’s IP properly, please enter the router’s IP address “192.168.0.1” in
sword
2
Use standard LAN ca
10BaseT and 100BaseT connections can be used simultaneously.
onnect ADSL Cable
Connect the supplied AD
to the ADSL terminator provided by your phone company.
ower Up
Connect the
Using a different one may cause hardware damage.
heck the LEDs
 The
Power LE
 For the LAN (PC) connection, on
 The
Wireless LED should be ON.
 The
ADSL LED should be ON if AD
 The
Internet (Green) LED may be OFF. After configuratio
6. Router’s default IP
 The default IP ad
IP Address: 192.168.0.1
Subnet Mask 255.255.255.
b Management, please configur
WN-300ARM-VPN.
 After configuring the
Web browser to manage the router, type the proper user name and password to pass the router’s
authentication.
7. User name and pas
 User’s
name: admin
 Password:
airlive