Revision history – ElmoMC SimplIQ Digital Servo Drives-Trombone Installation Guide User Manual
Page 3
Advertising
![background image](/manuals/558383/3/background.png)
Revision History
Version
Details
1.0
Initial release
1.1
Significant changes to the Appendix (Chapter 4)
1.2
Upgraded Trombone version to include new absolute
encoder settings and STO.
1.3
Sections 4.3 and 4.3.1: Auxiliary Supply Voltage range: 18
V to 30 V
1.4
September 2012
Change the overvoltage in 800 V mode, Pin layout, UL
recognition, and further optional versions added
“Metronome” was replaced by the “Composer” software.
1.401
February 2013
Added a caution and recommendation on the type of
cleaning solution to use for the Elmo unit.
1.402
June 2014
Document update
1.403
July 2014
Basic format changes
Advertising