Main feedback – ElmoMC SimplIQ Digital Servo Drives-Trombone Installation Guide User Manual
Page 33
Advertising
![background image](/manuals/558383/33/background.png)
Trombone Installation Guide
Installation
MAN-TROIG (Ver. 1.403)
33
Figure 10: Auxiliary 24 VDC Backup Supply Connection Diagram
Pin (J3) Function
Pin Positions
1
+24V Auxiliary Supply Input Positive
2
24VRET Auxiliary Supply Input Return
Table 1: Auxiliary 24 VDC Backup Supply Pins and Polarity
3.9. Main Feedback
The Main Feedback port is used to transfer feedback data from the motor to the drive.
The Trombone can accept any one the following devices as a main feedback mechanism:
•
Incremental encoder only
•
Incremental encoder with digital Hall sensors
•
Digital Hall sensors only
•
Interpolated Analog (Sine/Cosine) encoder (optional)
•
Resolver (optional)
•
Tachometer (optional)
•
Potentiometer (optional)
•
Absolute Encoder (optional)
Advertising