Revision history – ElmoMC SimplIQ Digital Servo Drives-Solo Guitar Installation Guide User Manual
Page 3
![background image](/manuals/558394/3/background.png)
Revision History
Version
Date
Details
Ver. 1.0
August 2008
Initial Release
Ver. 1.1
November 2008 Correction to J6 & J7 pinout diagrams
Ver. 1.2
May 2009
MTCR 01-009-41: Clarifications regarding models with
connectors and wires on Notice page (above) and page 17.
Changes to table in Section 3.3.1.
MTCR 01-009-52: Added Section 3.4.3: Motor (Brake, PTC).
Ver. 1.3
March 2010
MTCR 01-010-05: Notice page (above): The note was
updated, also updated on page 17.
MTCR 04-009-48: Table 2: Pin 2 renamed to PR.
Ver. 1.4
September
2012
Update to main board
Formatted according to the new template.
“Metronome” was replaced by the “Composer” software.
Ver. 1.401 January 2013
Updated the Powerful Digital Output Interface table.
Ver. 1.402 February 2013
Updated the Opto Digital Output Interface table.
Added a caution and recommendation on the type of
cleaning solution to use for the Elmo unit.
Ver. 1.403 July 2014
General format changes