ElmoMC SimplIQ Digital Servo Drives-Solo Guitar Installation Guide - Manual (Page 66)

Solo Guitar Installation Guide Technical Specifications
MAN-SOLGUIIG (Ver. 1.403)
www.elmomc.com
66
4.6.4. Auxiliary Feedback Port (output mode YA[4]= 4)
Feature Details
Emulated output • A, B, Index
• Differential
Output current capability • Maximum output current: I
OH
(max) = 2 mA
• High level output voltage: V
OH
> 3.0 V
• Minimum output current: I
OL
= 2 mA
• Low level output voltage: V
OL
< 0.4 V
Available as options • Emulated encoder outputs of analog encoder
• Emulated encoder outputs of the resolver
• Emulated encoder outputs of the tachometer
• Emulated encoder outputs of the
potentiometer
Maximum frequency f
MAX
: 5 MHz pulses/output
Edge separation between A & B Programmable number of clocks to allow adequate
noise filtering at remote receiver of emulated
encoder signals
Index (marker) Length of pulse is one quadrature (one quarter of an
encoder cycle) and synchronized to A&B
Figure 27: Auxiliary Feedback - Encoder Phase Diagram