ElmoMC SimplIQ Digital Servo Drives-Solo Guitar Installation Guide - Manual (Page 72)

Solo Guitar Installation Guide Technical Specifications
MAN-SOLGUIIG (Ver. 1.403)
www.elmomc.com
72
4.9. Pulse-Width Modulation (PWM)
Feature Details
PWM resolution 12-bit
PWM switching frequency on the load 2/Ts (factory default 22 kHz on the motor)
4.10. Compliance with Standards
Specification Details
Quality Assurance
ISO 9001:2008
Quality Management
Design
Approved IEC/EN 61800-5-1, Safety
Printed wiring for electronic equipment
(clearance, creepage, spacing, conductors
sizing, etc.)
MIL-HDBK- 217F Reliability prediction of electronic equipment
(rating, de-rating, stress, etc.)
• UL 60950
• IPC-D-275
• IPC-SM-782
• IPC-CM-770
• UL 508C
• UL 840
Printed wiring for electronic equipment
(clearance, creepage, spacing, conductors
sizing, etc.)
In compliance with VDE0160-7 (IEC 68) Type testing
Safety
Recognized UL 508C
Power Conversion Equipment
In compliance with UL 840 Insulation Coordination Including Clearances
and Creepage Distances for Electrical
Equipment
In compliance with UL 60950 Safety of Information Technology Equipment
Including Electrical Business Equipment
Approved IEC/EN 61800-5-1, Safety Adjustable speed electrical power drive
systems
In compliance with EN 60204-1 Low Voltage Directive 73/23/EEC