Mounting the falcon, Fal- xx/yyy r – ElmoMC ExtrIQ Digital Servo Drives-Falcon User Manual
Page 20
Falcon Installation Guide
Installation
MAN-FALIG (Ver. 1.502)
20
The P/N number at the top gives the type designation as follows:
Maximum DC
Operating Voltage
Continuous Current
(Amps)
Feedback:
Blank = Incremental
Encoder
and/or Halls
R = Resolver
FAL- XX/YYY
R
T = Tachometer &
Potentiometer
I = Interpolated
Analog
Encoder
Q =
Encoder
Absolute
4.
Verify that the Falcon type is the one that you ordered, and ensure that the voltage meets
your specific requirements.
3.3. Mounting the Falcon
The Falcon has been designed for two standard mounting options:
•
Wall Mount along the back (can also be mounted horizontally on a metal surface)
•
Book Shelf along the side
M4 round head screws, one through each opening in the heat sink, are used to mount the
Falcon (see the diagram below).
Figure 3: Mounting the Falcon