ElmoMC ExtrIQ Digital Servo Drives-Falcon - Manual (Page 61)

Falcon Installation Guide Technical Specifications
MAN-FALIG (Ver. 1.502)
www.elmomc.com
61
Pins Type Port Connector Location
15 D-Sub Socket FEEDBACK A
15 High Density D-Sub Plug J1
15 High Density D-Sub Socket J2
Table 18: Connectors on the Front of the Falcon
Pins Type Port Connector Location
8 RJ-45 CAN
8 RJ-45 CAN
15 High Density D-Sub Socket FEEDBACK B
8 RJ-45 RS-232
Table 19: Connectors on the Top of the Falcon
4.5.1. Backup Supply (Optional)
Feature Details
Auxiliary power supply DC source only
Auxiliary supply input voltage 24 V, 13 Vmin to 40 Vmax
Auxiliary supply input power 10 W
Note: The Falcon can operate without a 24 Volt backup power supply
J2: I/O J1: I/O Feedback A
CAN Feedback B RS-232