Chapter 3: installation, Before you begin, Site requirements – ElmoMC ExtrIQ Digital Servo Drives-Eagle User Manual
Page 18: Hardware requirements, Chapter 3, Installation, Site requirements 3.1.2. hardware requirements
Eagle Installation Guide
MAN-EAGIG (Ver. 1.902)
18
Chapter 3:
Installation
The Eagle must be installed in a suitable environment and properly connected to its voltage
supplies and the motor.
3.1. Before You Begin
3.1.1.
Site Requirements
You can guarantee the safe operation of the Eagle by ensuring that it is installed in an appropriate
environment.
Feature
Value
Ambient operating temperature
-40 °C to +70 °C (-40 °F to 160 °F)
Maximum operating altitude
12,000 m (39370 feet)
Maximum non-condensing humidity 95%
Operating area atmosphere
No flammable gases or vapors permitted in area
3.1.2.
Hardware Requirements
The components that you will need to install your Eagle are:
Component
Connector
Described
in Section
Diagram
Main Power Cable
VP+ VN-
Motor Cable
M1 M2 M3