ElmoMC ExtrIQ Digital Servo Drives-Eagle - Manual (Page 49)

Eagle Installation Guide Installation
MAN-EAGIG (Ver. 1.902)
www.elmomc.com
49
Note: In models not containing absolute encoder support, it is possible to use terminals 16 and 17
for SUPRET connections.
Feedback B on the “top” of the Eagle has a 26-pin high density D-Sub socket. Connect the Auxiliary
Feedback cable, from the controller or other device, to Feedback B using a 26-pin, high density D-
Sub plug with a metal housing. When assembling the Auxiliary Feedback cable, follow the
instructions in Section 3.4.3
0(Feedback Control and Communication Cable Assemblies).
Figure 23: Main Encoder Buffered Output or Emulated Encoder Output on Feedback B -
Connection Diagram