Unpacking the drive components – ElmoMC ExtrIQ Digital Servo Drives-Eagle User Manual
Page 20
Eagle Installation Guide
Installation
MAN-EAGIG (Ver. 1.902)
20
3.2. Unpacking the Drive Components
Before you begin working with the Eagle system, verify that you have all of its components, as
follows:
•
The Eagle servo drive
•
The Composer software and software manual
The Eagle is shipped in a cardboard box with styrofoam protection.
To unpack the Eagle:
1.
Carefully remove the servo drive from the box and the Styrofoam.
2.
Check the drive to ensure that there is no visible damage to the instrument. If any damage has
occurred, report it immediately to the carrier that delivered your drive.
3.
To ensure that the Eagle you have unpacked is the appropriate type for your requirements,
locate the part number sticker on the side of the Eagle. It looks like this:
The P/N number at the top gives the type designation as follows:
4.
Verify that the Eagle type is the one that you ordered, and ensure that the voltage meets your
specific requirements.
P = Panasonic Absolute Encoder