Connecting the power cables – ElmoMC ExtrIQ Digital Servo Drives-Eagle User Manual
Page 25
Advertising
Eagle Installation Guide
Installation
MAN-EAGIG (Ver. 1.902)
25
3.4.2.
Connecting the Power Cables
The V bus and motor power screws are located in the lower part of the Eagle and include the
following:
Pin Function
Cable
Pin Positions
VP+ Pos. Power input
Power
VN- Neg. Power input
Power
PE Protective earth
Power
3-Phase
Motor
Cable
DC
Motor
Cable
PE Protective earth
Motor
Motor
M1 Motor phase
Motor
N/C
M2 Motor phase
Motor
Motor
M3 Motor phase
Motor
Motor
Table 4: Connector for Main Power and Motor Cables
Note:
When connecting several motors, all must be wired in an identical manner.
PE
PE
PE
PE
Advertising