ElmoMC ExtrIQ Digital Servo Drives-Eagle - Manual (Page 51)

Eagle Installation Guide Installation
MAN-EAGIG (Ver. 1.902)
www.elmomc.com
51
Feedback B on the “top” of the Eagle has a 26-pin high density D-Sub socket. Connect the Auxiliary
Feedback cable from the feedback device to Feedback B using a 26-pin, high density D-Sub plug
with a metal housing. When assembling the Auxiliary Feedback cable, follow the instructions in
Section 3.4.3 (Feedback Control and Communication Cable Assemblies).
Figure 24: Differential Auxiliary Encoder Input Option on Feedback B -
Connection Diagram