JUMO 14597 safetyM STB/STW Ex - Safety Temperature Limiter and Safety Temperature Monitor Operating Manual - Manual (Page 141)

15 Behavior of outputs
135
2013-04-01
Difference – alarm (STB function) Inactive Active Error signal is being out-
put
v
Chapter 8.5.5
Difference – alarm inactive again (STB function) Inactive
Unlocking possible
Pre-alarm moni-
toring active
v
Chapter
8.3.4
Scaled analog signal is
being output
v
Chapter 8.5
After acknowledgement of difference – alarm (STB
function) Monitoring of the limit
value active
v
Chapter 8.3.2
Internal errors
Internal errors diagnostic channel active Inactive Pre-alarm moni-
toring active
v
Chapter
8.3.4
Scaled analog signal is
being output
v
Chapter 8.5
Internal errors diagnostic channel inactive again Monitoring of the limit
value active
v
Chapter 8.3.2
Internal errors safety channel active (STB) Inactive Active Error signal is being out-
put
v
Chapter 8.5.5
15 Behavior of outputs
Operating status Relay output alarm Relay output
pre-alarm KV
Analog output