Lenze ApplicationTemplate PackML (PLC Designer R3-x) - Manual (Page 86)

Visualising in the ApplicationTemplate PackML
Extending the visualization
86
Lenze · ApplicationTemplate PackML · 1.0 EN - 05/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
10 Visualising in the ApplicationTemplate PackML
The ApplicationTemplate PackML contains the predefined L_Main
visualization in the A20_Visualisation folder
In order to create further visualization from the visualization elements in the ApplicationTemplate
PackML, the steps described in the following section have to be executed.
10.1 Extending the visualization
In this section you'll learn about how the L_Main visualisation can be extended by further
visualisation pages.

How to proceed:
1. Call the visualization:
• Double-click the 20_Visualisation folder.
• Double-click L_Main.
• The precondition for extending the
visualisation in this example is that first
other machine modules have to be
implemented into the
MaschinenModulTree (
MMT).
 Integrating machine modules in the
MMT ( 42)
• The other module application has to be
integrated in the program part in the
A11_ModulAppCalls folder.
• Call MAC_Task_High . (example:
MM_Dcl.Modul3.App1)