Lenze ApplicationTemplate PackML (PLC Designer R3-x) - Manual (Page 88)

Visualising in the ApplicationTemplate PackML
Defining the properties of buttons
88
Lenze · ApplicationTemplate PackML · 1.0 EN - 05/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Use the Input assistance from the Application element
• ...select the desired function block that provides the data for the corresponding
visualization page.
10.2 Defining the properties of buttons

How to proceed:
1. Extend Vis_eFrame in the A71_LocalSources\Structs ENUM folder:
Add the name of the visualization manually, example: MVis_Module3
Note: The arrangement of entries in the ENUM Vis_eFrame has to correspond to the
selected order of #0 Frame of the L_Main visualization.

2. Go to A20_Visualisation\SubVisu folder and select the Keys_Main visualization.
3. Create a new button.
• Highlight the Module 2 button:

• Right-click Copy
• Right-click  Insert
• Place the button on the desired position.
• Rename button (example: Module 3):
4. Go to the Properties dialog of the Module 3 button and select the Color variables\Toggle
color variable.
5. Adapt the value of the button copied before to the new name (example: Module3)