Lenze ApplicationTemplate PackML (PLC Designer R3-x) - Manual (Page 90)

Visualising in the ApplicationTemplate PackML
Adding a visualization: Standard procedure
90
Lenze · ApplicationTemplate PackML · 1.0 EN - 05/2014
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
P
• Adapt the frame size.
• Execute the Frame selection command
by right-clicking into the frame.
• Accept the desired visualization to
the selection under Available
visualisations by clicking the >
button.
• Click OK to accept the visualization
to the frame.
• Example : In order to accept the global
error list, select the
L_EATP.L_EATP_VisErrorList entry.
• Adapt/position the size of the
visualization.
• For the error list (Error List), no further
assignments are required.
Result: The visualization is now
serviceable
• Example: In order to insert a window
for activating errors for a specific
machine module, select the
L_EATP.L_EATP_VisErrorSet
visualization.
Example: Assigning the visualization for the ErrorsA block of
the App1 module application of Module1.
• Assign the L_EATP.L_EATP_VisErrorSet
visualization to the data source:
• Assign the corresponding data
source in the Properties dialog
window.
• Tip: The predefined visualization
elements of the ApplicationTemplate
PackML do not require any manual data
assignments.
• Therefore (after the compilation
process), logging in/ going online is
possible without any extra effort
involved.