Lenze E94AxHE Technology Application Actuating drive - Speed - Manual (Page 11)

EDS94TA10010xxxx EN 1.1 - 10/2008
L
11
9400 Technology applications | Actuator – speed
Short setup
Step 1: Creating a project
3.3 Step 1: Creating a project
1. Start »Engineer«.
2. Go to Start-up wizard and select the option "New project (empty)" and enter a name for
the project in a next step.
3. Insert the axis for the conveyor drive.
– Add the corresponding components (controller, motor, extension module) to the
axis.
– Select the application "Actuator – Speed" for the controller.
– Example project view in the »Engineer«: