MTS SWIFT 10 ATV Sensor - Manual (Page 29)

Specifications
SWIFT 10 ATV Sensors Hardware Overview 29
Power Requirements
Input voltage
Fuses 10–28 V DC
Internal thermal, self-resetting
Power Consumption 4 Watts maximum without transducer or encoder
6 Watts typical with transducer and encoder at 12
V DC
Angular velocity
Encoder limit
Processing limit
Encoder resolution 2,200 rpm maximum
10,000 rpm maximum
2048 counts per revolution
(512 pulses with quadrature)
Time delay (encoder tick to main output stable) 150 µs (typical)
Transducer cable length 100 ft maximum
Analog outputs
Voltage
Capacitive load
Current
Noise at output, with typical gains
±10 V range † (force and moment outputs)
0–5 V sawtooth (angle output)
0.01 µF maximum
2 mA maximum
7 mVpp, DC - 500 Hz (typical)
15 mVpp, DC - 500 Hz (maximum)
* Add 25.4 mm (1.0 in) for ground lugs.
† Standard from MTS. Other full scale voltages can be evaluated and may be provided at special
request.
Transducer Interface (part 2 of 2)
P ARAMETER S PECIFICATION