MTS SWIFT 10 ATV Sensor User Manual
Page 87
Road Simulator
SWIFT 10 ATV Sensors
Installing the Transducer
87
•
Slip ring jack screws (2): M5 X 0.5 mm
•
Torque wrenches, capable of the following ranges:
19–38 N•m (14–28 lbf•ft)
95 N•m (70 lbf•ft)
Slip ring extension assembly
Four size M12 X 1.75 mm X 30 mm long bolts
•
Slip ring assembly fasteners
Four size M8 X 1.25 mm X 20 mm long bolts
•
Torque wrenches, capable of the following ranges:
24–74 N•m (18–55 lbf•ft),
203–815 N•m (150-600 lbf•ft);
108–325 N•m (80–240 lbf •ft)
93 N•m (69 lbf•ft)
•
Cables (transducer and BNC, plus customer-supplied from transducer
interface to data recorder)
•
Tie wraps
•
Data recorder
•
Power supply–12 V DC or suitable 12 V DC vehicle battery
1
1. Not all vehicles have alternators to maintain the charge to the vehicle battery
if the battery is also used by the SWIFT sensor and the data acquisition
system. Additional batteries and/or chargers may be necessary.