MTS SWIFT 10 ATV Sensor User Manual
Page 84
SWIFT 10 ATV Sensors
84
Road and Track Vehicles
Installing the Transducer
Do not use the SWIFT sensor if it has been exposed to load cycles that
exceed the full scale calibrated ranges listed on the calibration sheets
provided with each transducer.
Excessive loading or load cycles could cause a fracture of the transducer,
wheel rim, hub adapter, or fasteners and can result in serious injury, death
or property damage.
Always be aware of the maximum full scale loads appropriate for your transducer.
If the prescribed limit for any axis of the transducer has been exceeded, contact
MTS for an evaluation and, if necessary, to arrange for the return of the
transducer, with the recorded load cycles, to MTS for physical inspection and
analysis of the load cycle history.
WARNING