MTS TestLine - Manual (Page 125)

• When removing the hydraulic components, ensure that you have drain pans and towels available
that are sufficient to handle the drain volume of the item you are disconnecting.
• Use safe practices when removing hydraulic components and allow any trapped or latent pressure
to dissipate safely through a loosened connection before removing the component.
• Cap each hose, port, and hardline component.
9. Dispose of all hydraulic fluid in accordance with all local codes regarding hazardous materials handling
and disposal.
10. Disconnect all cables from the controller.
MTS TestLine Test System Operation | 125
Decommissioning