MTS TestLine User Manual
Page 52
3. If necessary, select a project.
It is common practice to keep all files in Project1. If you find this acceptable, at the Select Project
window, select Project1. Otherwise enter your own project name for the project.
Note: The Select Project window will not appear if you selected Project1 as the default project
when you installed the MTS TestSuite application.
4. If necessary, select a controller.
In the Controller Selection window, select the controller for the station that you are using.
Note: This window may not appear in all cases.
5. Select a configuration and parameter set.
Under normal circumstances, you would select a configuration file and parameter set recommended
by the experts in your lab. However, for this example HCF test, select the TrainingConfig.cfg
configuration but do not click OK yet.
52 | MTS TestLine Test System Operation
Running the Example HCF Test