MTS TestLine - Manual (Page 62)

a) Similarly, open the Tuning: Ch1 Force tab by selecting Station Setup button > Channels > Ch1
(or other depending on your configuration) > Force, clicking the Tuning Fork button, and
selecting the Adjustments tab.
b) Use the following parameters for this hard specimen test:
• P Gain — 1
• I Gain — 1
• D Gain — 0
• F Gain — 0
• F2 Gain — 0
• Proportional FF Gain — 0
• FL Filter — Set to maximum positive value
4. Retain the Tuning user access level.
62 | MTS TestLine Test System Operation
Running the Example HCF Test