MTS TestLine - Manual (Page 42)

Description File Type
Test Template files are command files created with Multipurpose Elite for
performing tests on Station Configurations. Test Template files contain only
test definition information. Test Template Files
MTS TestSuite Test Template Icon
Test Procedures files are similar to Test Template files, but include a container
that stores test data and results. You can create a Test Procedure file from Test Procedure Files
scratch, or by selecting a Test Template file, which automatically copies the
test definition information and adds a container for test data.
MTS TestSuite Test Procedure Icon
When you run a test report, data is sent from MTS TestSuite MPX to an Excel
spreadsheet. The spreadsheet can be viewed even if you do not have Excel
on the interface PC using the Excel viewer. Reports
Creating and Modifying Parameter Sets
You use the Station Manager application to create and modify parameter sets. Parameter Sets define the
operational characteristics of the resources in your station. You can create up to 15 Parameter Sets per
configuration.
Concept of the Station Manager Application Creating a Parameter Set
Selecting and Saving Parameter Sets
You select a Parameter Set when you open your Station Configuration. It is a good idea to save your
parameter set periodically during station setup as you make changes in the Station Manager application.
Concept of a Station Configuration File Paired with a Parameter Set
42 | MTS TestLine Test System Operation
Key Concepts