MTS TestLine - Manual (Page 65)

a) In the Station Manager main window, click the Manual Command button.
b) Select the following:
1. Channel — Ch1 (or other depending on your configuration)
2. Control Mode — Displacement
3. Enable Manual Command checkbox — Checked
Manual command is automatically matched to feedback when the HSM is cycled to Low Power to
ensure that the actuator does not move before desired.
2. Familiarize yourself with the slider control.
Manual Command Slider Function
Explanation Description Item
High gear—Slider movement is proportional with
actuator movement. Use with extreme caution. Drag slider for "high gear" 1
Low gear—Incremental movement based on settings
for the slider control. Multiple incremental Click between ticks for "low
gear" 2
movements can be made by holding down the
mouse button.
Super low gear—Very fine incremental movement
based on settings for the slider control. Multiple Click arrow for "super low
gear" 3
incremental movements can be made by holding
down the mouse button.
Before moving the actuator, familiarize yourself with the slider control as shown. Note that the following
controls below can be adjusted by right-clicking the slider control.
MTS TestLine Test System Operation | 65
Running the Example HCF Test