Orbit Baby Generation-one Toddler Car Seat - Manual (Page 19)

Rear
-Facing Installation
36
36
Rear
-Facing Installation
37
37
37
37
Installation on the Orbit Base
Never operate your vehicle unless
the Toddler Car Seat is LOCKED
into the Rear-Facing position.
Check both Rotation Indicators on
the Base. If either Rotation Indicator
is red, re-secure the Toddler Car Seat
to properly lock into the Base.
When a Release Lever on the
Toddler Car Seat is pulled, the
Toddler Car Seat is not secured
properly to the Base (see Photo A).
PINCH HAZARD: When installing the
Toddler Car Seat on the Orbit Base,
make sure all fi ngers and hands are
clear of the SmartHub area.
WARNING !
When Using the Orbit Base
!
Terms You Need to Know
Rear-Facing Belt Path
Brace Plugs
Release Levers
Upholstery Lower Panel
LATCH Connectors
Tether Hook
A
For instructions on how to
install your Orbit Base in your
car, please refer to the Orbit
Base Manual, included with
the Orbit Base and with the
Toddler Car Seat.