BT In Touch 2000 - Manual (Page 21)

21
User
Phone
&
P
endant
Setting up the emergency facility on
your BT In Touch 2000 User Phone
Entering emergency contact
phone numbers
IMPORTANT
It is important that you set up your emergency
Carer contact numbers correctly. To do this, first
enter the phone numbers and names of the Carers
into the Quickdial memories. Then separately give
emergency status to each Quickdial memory.
If a Quickdial memory has not been allocated
emergency status, it will not be automatically
dialled when you press the Emergency button (on
the BT In Touch 2000 User Phone or Pendant).
If none of the Quickdial memories have been
allocated emergency status then the emergency
feature will not work. A voice prompt is played to
alert the User “Warning. No emergency numbers”.
To enter your emergency phone numbers
You can enter up to 3 emergency
Carer contact numbers.
Press the Store button.
The display shows:
‘Select location’ by pressing one of the
Quickdial memory buttons, either
M1 or M2 or M3.
The display shows (if M2 was pressed):
The display then shows:
Enter the phone number.
Store
MEMORY 2
12:00 AM 01 JAN
SELECT LOCATION
ENTER NUMBER
THEN PRESS STORE