BT In Touch 2000 - Manual (Page 50)

50
Carer
Phone
6 Connect the power cable
Plug the power cable into the socket on the
underside of your BT In Touch 2000c Carer
Phone as shown. The cable needs to be pressed
in to its channel to keep it out of the way.
The way you do this will depend on how you
have positioned your phone (with or without
the base stand, wall-mounted or not). See ‘Desk
and wall-mounted phone positions’
on page 90.
7 Positioning your BT In Touch
2000c Carer Phone
Your BT In Touch 2000c Carer Phone can be
positioned in 3 different ways:
Please note
Make sure you test your phone before you finally fix
it in position.
• Flat on a table or desk.
• Raised position on a table or desk using
the base stand.
• Wall-mounted using the base stand.
See ‘Desk and wall-mounted phone positions’ on
page 90.
8 Setting time and date
(with Caller Display)
If you have already subscribed to a Caller
Display network service, the time and date on
the display will be set automatically when the
first incoming phone call is received. For more
information about BT Select Services, call BT
on Freefone 0800 800 150.