BT In Touch 2000 - Manual (Page 26)

26
User
Phone
&
P
endant
Registering your BT In Touch
Pendant(s)
Before using your BT In Touch Pendants for
the first time, you need to register them to your
BT In Touch 2000 User Phone.
When attempting to register your BT In Touch
Pendant, if no emergency contact numbers
have been stored with emergency status, when
the Pendant button is pressed you will hear
3 beeps and the message “Warning. No
emergency number stored”
.
To register your BT In Touch Pendant(s)
Press and hold down the Store button for
5 seconds. The display shows:
Continue holding down the Store button.
Press and release the Pendant button.
If you have a second BT In Touch
Pendant, continue holding down the
Store button.
Press and release the second Pendant
button.
Now release the Store button.
You will hear a double beep, and the
announcement “Pendant logged on.
Please test all Pendants.”
The display shows:
BT In Touch Pendant registration is
now complete.
Testing the range of the BT In Touch
Pendant
You need to check the performance of the BT
In Touch Pendant under the conditions of your
own home and garden.
✓
Registering your BT In Touch
Pendant
LOG PENDANT
Store
PENDANT LOGGED ON