BT In Touch 2000 - Manual (Page 32)

32
User
Phone
&
P
endant
Starting an emergency call
There are two ways to start the emergency
sequence on the BT In Touch 2000 User Phone
- from your BT In Touch Pendant and from
your BT In Touch 2000 User Phone itself.
From your BT In Touch Pendant
Press the Pendant button on the BT
In Touch Pendant, the light will flash
to confirm that the button has been
pressed. The BT In Touch 2000 User
Phone will beep and the orange
Emergency button will flash, the
phone will automatically switch to
‘handsfree’ and start the emergency
sequence by dialling the first of the
emergency contact numbers that you
have programmed.
From your BT In Touch 2000 User Phone
Press the orange Emergency button
on the BT In Touch 2000 User Phone.
The phone will beep and the orange
emergency light will flash, the phone
will automatically switch to ‘handsfree’
and start the sequence by dialling the
first of the emergency contact
numbers you have programmed.
What the User will hear during an
emergency call
The BT In Touch 2000 User Phone will beep to
confirm that the Emergency button on either
the BT In Touch 2000 User Phone or the
BT In Touch Pendant has been pressed. It will
then switch to ‘handsfree’. In ‘handsfree’, the
BT In Touch 2000 User Phone will play the
emergency sequence to the User reassuring
them that help is being sought.
The BT In Touch 2000 User Phone
in an emergency