BT In Touch 2000 - Manual (Page 71)

71
T
esting
in
an
emergency
situation
At the BT In Touch 2000
User Phone
continued...
You will hear the Carer hang up and the
User Phone will automatically clear down.
Now make another Emergency Call by
pressing the Emergency button.
You will see the Handsfree LED go out and
the display will return to an idle state.
At the BT In Touch 2000c
Carer Phone
continued...
Stop the flashing light by pressing and
holding the Cancel button.
Clear down by pressing the Handsfree
button.
The BT In Touch 2000c Carer Phone will
ring again, the emergency light will start
flashing and the phone will start beeping.
This time, answer the call and input the
3-digit code (5 5 5 ).
Have a short handsfree conversation with
the User.
Clear down the BT In Touch 2000 User
Phone to allow the User to make further
calls by pressing 6 ✱ ✱. You will hear the
User Phone clear down.
J KL J KL J KL
Please note
If you receive an emergency call using a normal phone and you wish to immediately make another call, for
example, to the emergency services, you must slowly enter
6 ✱ ✱ from your keypad. This will clear the line from
the original emergency call even if the call has not been ended by the User.
If you are using a mobile phone, take particular care to dial slowly, as pressing the ✱ button twice can convert
to a
+ which denotes an international call.