BT In Touch 2000 - Manual (Page 56)

56
Carer
Phone
If you (the Carer) have subscribed to a Caller
Display network service and allocated
Quickdial numbers with emergency status,
then the BT In Touch 2000c Carer Phone will
alert you every time an emergency call comes
in from the User’s number.
In the event of an incoming emergency call, the
BT In Touch 2000c Carer Phone will ring and
beep and the orange Emergency light will flash.
Answering an emergency call
To answer an emergency call, simply pick up
the handset or press the Handsfree button.
You will hear the emergency announcements
being played down the line by the BT In Touch
2000 User Phone. For example;
“Emergency Call. Emergency Call.
Please enter the three digit code”
Taking control of the emergency call by
entering the 3-digit code
To take control of the emergency call
and clear down the emergency
sequence on the BT In Touch 2000
User Phone, you (the Carer) must
enter the 3-digit code (5 5 5 ).
Please note
You do not have to wait until the emergency
announcement has finished before you enter the
3-digit code (5 5 5 ).
If you do not enter 5 5 5 , after one minute the BT
In Touch 2000 User Phone will end the call and
proceed to ring the next emergency contact number
which has been allocated emergency status.
When 5 5 5 is entered the BT In Touch
2000c Carer Phone will stop beeping
but the emergency light will continue
to flash.
You are now automatically in ‘handsfree’.
The BT In Touch 2000c Carer
Phone in an emergency
J KL
J KL
J KL