BT In Touch 2000 - Manual (Page 34)

Handsfree
34
User
Phone
&
P
endant
The BT In Touch 2000 User Phone
in normal use
Making and receiving calls
To make a call
Lift the handset and listen for a dialling
tone.
Dial the number you require.
To end the call, replace the handset.
To make a non-emergency call to a Carer
Because your Carer numbers have
been allocated emergency status, if
you dial them in a non-emergency your
BT In Touch 2000c Carer Phone will
still treat the call as an emergency.
To avoid this you will need to insert
the prefix 141.
Your 3 Carer numbers should be
stored in the Directory as well as
under the Quickdial memories with
the prefix 141 inserted before the
Carers telephone number. See page 38
for ‘Storing names and numbers in the
Directory’
.
Once this prefix has been entered,
when you dial the relevant number
from the Directory, the BT In Touch
2000c Carer Phone will ring as normal
but the emergency light will not flash
and beep as it would in an emergency.
This will prevent any unnecessary
alarm for the Carer.
To dial a Quickdial memory number which
has not been allocated emergency status
Lift the handset, or press the
Handsfree button.
Press the required Quickdial memory
button, for example M1, M2 or M3.
The number stored on that Quickdial
memory button is dialled.