Practical Instrument Electronics 820-ELITE - Manual (Page 3)

Page 1
General Information
Technician friendly operation
The unique and intuitive EZ-DIAL Double Click Menu makes it
easier to setup than other multifunction calibrators. Uses the same
menus as the single function PIE Evolution Calibrators.
Use it as a milliamp and voltage calibrator
Source 0 to 24.000 mA, 0 to 10.250 V dc, -20.000 to 99.999
mV and -500.00 to 999.99 mV
Read to 24.000 mA, 60.00 V dc ±99.999 mV & ±999.99 mV
Simulate 2-Wire Transmitters & Power up transmitters & loops
Calibrate in temperature with 0.1°C/°F resolution
Types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) & P II
Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850) RTD
Copper 10 & 50 Ohm, Nickel 100 and 120 Ohm RTD
Checkout flow and vibration systems
Source & read frequency from 0 to 2000 CPM (Counts-Per-
Minute), 0.00 to 999.99 Hz, 0.0 to 9999.9 Hz and 0.000 to 20.000 kHz.
Checkout resistance instruments, loop & wiring problems
Source and read resistance from 0.00 to 410.00 and 0.0 to 4001.0
ohms. ‘Beep’ out connections with the built-in continuity checker.
Troubleshoot loop problems
Quickly diagnose ground fault and current leakage with patented
loop diagnostic technology (US Patent 7,248,058).
Simulate pH probes into transmitters & analyzers
Source from 0.000 to 14.000 pH @ 25°C (77°F) corresponding
to -414.12 to +414.12 mV to verify the pH system is operating
properly before placing the probe into calibrated buffers.
Measure pressure with optional pressure modules
Three modules for 30 PSI/2 bar gauge, 500 PIS/35 bar gauge
and 30 PSI/2 bar absolute
Guaranteed compatible with all instrumentation
Works with Rosemount & Honeywell Smart Transmitters, PLCs,
DCSs, Multi-Channel Recorders and other pulsed excitation devices.