Precision Turbo and Engine BigStuff3 GEN3 PRO SEFI System Hardware & BigComm Software User Manual
Page 112
BigStuff3 Pro SEFI System
Version 2.1 – February 2011
104
An example log screen is shown below. In this example, the Log Window
was setup to
collect and display Scaled Load, Scaled RPM, TPS, V bat MAP, RPM, Spark Advance and Boost, as
shown on the right side of the screen.
The left and right arrow keys on the keyboard can be used to move horizontally across the logged data
graph. As the vertical, red “cursor-line” is moved across the graph, the Log Dash displays the actual
engine operating parameters recorded at each point in the graph.
The user can also “zoom- in” on a particular area of the logged data in the graph. To “zoom- in” on a
particular area of the graph, depress and hold the left mouse button. Drag the mouse to cover the
desired area. A red box is created around the selected area, as shown in the screen print below.
This window identifies the file
name and location where the
Logged Data was automatically
stored.
Red (vertical)
cursor line.