RKI Instruments Eagle 2 User Manual
Page 42
38 • Viewing, Printing, Exporting, and Deleting Data in the Data Window
•
In table format, the interval trend data is shown as the
average gas readings over the user defined interval trend
time. So if the data logging session started at 4:13:38 PM
and the interval time is set to 1 minute, then the readings
logged at 4:14:38 PM are the average reading for each
channel over that one minute period.
•
Events are displayed on the screen under the channel in
which they occur and with the time of the event. Events
are displayed whether they occurred at scheduled log
times or in between them. Events include gas alarms such
as a warning condition, trouble conditions such as a
sensor failure, and an indication that the unit is returning to
“normal” condition after an alarm has been reset using the
POWER ENTER RESET button on the Eagle 2.
•
If you click the Summary button, the Data Window will
split into two frames, one above the other, with the data
table in the lower frame and the summary information
shown in the upper frame. The summary information is the
same as the one shown in the lower right frame in
Figure 26. To return to the one frame format, click
Summary again.