RKI Instruments Eagle 2 - Manual (Page 82)

78 • Changing Eagle 2 Instrument Parameters
Off download commands will be selectable. Click the
Instrument Information download command to retrieve the
instrument information from the Eagle 2. If you wish to
download data before making changes, click Complete
Download instead of Instrument Information.
5. Click the Set button to display the Set Window. Use the
Eagle 2 Status Frame and the Gas/Sensor Frame to change
parameters stored in the Eagle 2.
Alarm settings are shown in the Gas/Sensor Frame at the
bottom of the screen. Settings for installed sensors are
shown in black text. Additional alarm settings for the installed
sensors are shown in green text. The oxygen alarm settings
shown in green at the bottom of the Gas/Sensor Frame are
for Inert Mode. Inert Mode must be activated in the Eagle 2
for this alarm setting to appear. Alarm setting changes made
to the Inert Mode oxygen alarms will not affect the Normal
Mode oxygen alarms. The Normal Mode oxygen alarms can
be viewed and edited above the Inert Mode oxygen alarms in
Figure 64: Set Window
Click to upload changes to Eagle 2