RKI Instruments Eagle 2 - Manual (Page 95)

Detail Settings Button • 91
While the pre-defined gases may not be edited, the 5 user-
defined gases may be edited by doing the following:
1. With the Data Logger Management Program running, click
the Set button to display the Set window. Click the Detail
Settings button to display the Detail Settings window. Click
on the Conversion Table tab and then click on the User-
Defined Table tab.
2. If no user-defined gases have been previously defined for
the connected instrument, the columns in User-Defined
Table will be blank. Any previously defined gases will appear.
3. Export the current data by pressing the “Export csv file”
button. Choose the file path you wish to save the file in.
Figure 75: User-Defined Table