Using the self-cleaning oven – Summit REX242W User Manual
Page 22
22
Using the self-cleaning oven.
The oven door must be closed and all controls must be set correctly for the cycle to work prop-
erly.
Before a Clean Cycle
How to Set the Oven for Cleaning
Wipe up heavy soil on the
oven bottom (appearance
may vary).
(on some models)
The oven must be cool in order to set the
self-clean cycle.
We recommend venting your kitchen with
an open window or using a ventilation fan
or hood during the first self-clean cycle.
Remove broiler pan, broiler grid, all cook-
ware and any aluminum foil from the
oven.
The shiny, silver-colored oven shelves (on
some models) can be self-cleaned, but
they will darken, lose their luster and be-
come hard to slide.
Do not use abrasives or oven cleaners.
Clean the top, sides and outside of the
oven door with soap and water.
Make sure the oven light bulb cover (on
some models) is in place and the oven
light is off.
IMPORTANT: The health of some birds is ex-
tremely sensitive to the fumes given off
during the self-cleaning cycle of any oven.
Move birds to another well ventilated
room.
1. Touch the SELF CLEAN pad.
2. Using the + or – pad, enter the desired
clean time, if a time other than 4 hours is
needed.
Clean cycle time is normally 4 hours. You
can change the clean time to any time
between 3 hours and 5 hours, depending
on how dirty your oven is.
3. Touch the START pad.
The door locks automatically. The display
will show the clean time remaining. It will
not be possible to open the oven door un-
til the temperature drops below the lock
temperature and the LOCKED DOOR light
goes off.
When the LOCKED DOOR light is off, open
the door.
• The words LOCK DOOR will flash and the
oven control will signal if you set the
clean cycle and forget to close the oven
door.
• To stop a clean cycle, touch the CLEAR/
OFF pad. When the LOCKED DOOR light
goes off indicating the oven has cooled
below the locking temperature, open the
door.
SELF
CLEAN
START
Safety Instructions
Operating Instructions
Care and Cleaning
Troubleshooting Tips
Consumer Support
Installation Instructions