Selecting types of cookware – Summit REX242W User Manual

Page 9

Advertising
background image

9

Stainless Steel:
recommended

Selecting types of cookware.

The following information will help you choose cookware that will give good performance on glass cooktops.

Check for flat bottoms by us-

ing a straight edge.

Pans with rounded, curved,

ridged or warped bottoms are

not recommended.

Wok Cooking

We recommend that you use only a flat-

bottomed wok.
They are available at your local retail store.

Do not use woks that have support rings.

Use of these types of woks, with or without

the ring in place, can be dangerous.

Placing the ring over the surface unit will

cause a buildup of heat that will damage

the porcelain cooktop. Do not try to use

such woks without the ring. You could be

seriously burned if the wok tips over.

Use medium- or heavy-weight cookware.

Aluminum cookware conducts heat faster

than other metals. Cast-iron and coated

cast-iron cookware are slow to absorb

heat, but generally cook evenly at low to

medium heat settings. Steel pans may

cook unevenly if not combined with other

metals.

Surface Cookware Tips

For best cooking results, pans should be

flat on the bottom. Match the size of the

saucepan to the size of the surface unit.

The pan should not extend over the edge

of the surface unit than 1 inch.

Not over 1 inch

Use only flat-bottomed

woks

The following information will help you choose cookware which will give food performance on coil cooktops.

Home Canning Tips:
Be sure the canner is centered over the

surface unit.
Make sure the canner is flat on the bot-

tom.
Use recipes and procedures from repu-

table sources. These are available from

manufacturers such as Ball® and Kerr®

and the Department of Agriculture Exten-

sion Service.
To prevent burns from steam or heat, use

caution when canning.

Stoneware:
usable, but not recommended
Poor performance. May scratch the sur-

face.

Glass-ceramic:
usable, but not recommended
Poor performance. May scratch the sur-

face.

Porcelain Enamel Covered Cast Iron:
recommended
As long as the cookware is covered com-

pletely with porcelain enamel, this cook-

ware is recommended. Caution is recom-

mended for cast-iron cookware that is not

completely covered with smooth porce-

lain enamel, as it may scratch the glass-

ceramic cooktop.

Copper Bottom:
recommended
Copper may leave residues which can ap-

pear as scratches. The residues can be re-

moved, as long as the cooktop is cleaned

immediately. However, do not let these

pots boil dry. Overheated metal can bond

to glass cooktops. An overheated copper

bottom pot will leave a residue that will

permanently stain the cooktop if not re-

moved immediately.

Aluminum:
heavy weight recommended.
Good conductivity. Aluminum residues

sometimes appear as scratches on the

cooktop, but can be removed if cleaned

immediately. Because of its low melting

point, thin-weight aluminum should not be

used.

Safety Instructions

Operating

Instructions

Care and Cleaning

Troubleshooting Tips

Consumer Support

Installation

Instructions

Advertising