Summit REX242W - Manual (Page 33)

33
Installation Instructions
ELECTRICAL CONNECTIONS
ELECTRICAL REQUIREMENTS
CAUTION: For personal safety, do not
use an extension cord with this appli-
ance. Remove house fuse or open cir-
cuit breaker before beginning installa-
tion.
We recommend you have the electrical wiring and
hookup of your range connected by a qualified electri-
cian. After installation, have the electrician show you
where your main range disconnect is located.
Check with your local utilities for electrical codes which
apply in your area. Failure to wire your oven according
to governing codes could result in a hazardous condi-
tion. If there are no local codes, your range must be
wired and fused to meet the requirements of the Cana-
dian Electrical Code, Part 1 Latest Edition.
This appliance must be supplied with the proper volt-
age and frequency, and connected to an individual
properly grounded branch circuit, protected by a cir-
cuit breaker or fuse having an amperage as specified
on the rating plate. The rating plate is located under
the cooktop or in the front frame. (See below pictures).