Summit REX242W - Manual (Page 23)

23
How to Delay the Start of Cleaning.
After a Clean Cycle
1. Touch the SELF CLEAN pad.
2. Using the + or – pad, enter the desired
clean time.
3. Touch the START TIME pad.
4. Using the + or – pad, enter the time of
day you want the clean cycle to start.
5. Touch the START pad.
You may notice some white ash in the
oven. Wipe it up with a damp cloth after
the oven cools.
If white spots remain, remove them with a
soap-filled scrubbing pad and rinse thor-
oughly with a vinegar and water mixture.
These deposits are usually a salt residue
that cannot be removed by the clean
cycle.
If the oven is not clean after one clean
cycle, repeat the cycle.
• You cannot set the oven for cooking un-
til the oven is cool enough for the door to
unlock.
• If the shelves become hard to slide, wipe
the shelf supports with cooking oil.
The door locks automatically. The display
will show the start time. It will not be pos-
sible to open the oven door until the tem-
perature drops below the lock tempera-
ture and the LOCKED DOOR light goes off.
When the LOCKED DOOR light is off, open
the door.
Using the self-cleaning oven.
The oven door must be closed and all controls must be set correctly for the cycle to work prop-
erly.
(on some models)
SELF
CLEAN
START
START
TIME
Safety Instructions
Operating
Instructions
Care and Cleaning
Troubleshooting Tips
Consumer Support
Installation Instructions